FloorDex Product Reference
Big Chip™ Rubber Rolls
Model · 13221

Big Chip™ Rubber Rolls

rubber rolls made in usa EPDM
made in usa
Red chip, blue chip, little chip, little chip. With US Rubber's Big Chip™ Rubber Rolls, you don't have to stay in the rat race. These rubber rolls feature a color chip that is 2-3 times larger than a standard rubber roll, which means now when you order that red chip or blue chip, you will actually see the color. Great as flooring in both home and commercial gyms, these rubber rolls are sure to turn heads. Easy to clean and maintain, this rubber gym floor roll is backed by a 25-year warranty.
  • 25-year warranty.
  • Great for home gyms and high-traffic areas.
  • Easy to clean and maintain.
  • Mold and mildew resistant.
  • Can be installed indoors and out.
Size
4' wide
Items/box
1.0000
Variants
28
Warranty
25-year warranty

Available Variants (28)

Swatch SKU Color Status In stock
20% Blue
13221_19296_81319 20% Blue Active No
20% Chrome
13221_19296_81320 20% Chrome Active No
20% Green
13221_19296_81321 20% Green Active No
20% Gray
13221_19296_81322 20% Gray Active No
20% Orange
13221_19296_81323 20% Orange Active No
20% Purple
13221_19296_81324 20% Purple Active No
20% Red
13221_19296_81325 20% Red Active No
20% Blue
13221_19304_81528 20% Blue Active No
20% Chrome
13221_19304_81529 20% Chrome Active No
20% Green
13221_19304_81530 20% Green Active No
20% Gray
13221_19304_81531 20% Gray Active No
20% Orange
13221_19304_81532 20% Orange Active No
20% Purple
13221_19304_81533 20% Purple Active No
20% Red
13221_19304_81534 20% Red Active No
20% Blue
13221_19305_81550 20% Blue Active No
20% Chrome
13221_19305_81551 20% Chrome Active No
20% Green
13221_19305_81564 20% Green Active No
20% Gray
13221_19305_82929 20% Gray Active No
20% Orange
13221_19305_82930 20% Orange Active No
20% Purple
13221_19305_82931 20% Purple Active No
20% Red
13221_19305_82932 20% Red Active No
20% Blue
13221_19306_82933 20% Blue Active No
20% Chrome
13221_19306_82934 20% Chrome Active No
20% Green
13221_19306_82935 20% Green Active No
20% Gray
13221_19306_82936 20% Gray Active No
20% Orange
13221_19306_82937 20% Orange Active No
20% Purple
13221_19306_82938 20% Purple Active No
20% Red
13221_19306_82939 20% Red Active No

Installation

When installing rolled rubber flooring, it is important to choose the right installation method for your project. The most common methods of adhering rubber rolls to the subfloor are: A: Double-Sided Tape Installation Ensure that the subfloor is clean, dry, and free of any debris. Loosely lay the rubber rolls in the room to achieve your desired layout. Allow the rolls to relax for 24-48 hours to ensure proper installation. Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches. Cut the rubber rolls to fit the room using a straight edge and a utility knife with a fresh blade. Leave a gap around the perimeter roughly the thickness of the rolls being used to account for expansion and contraction. Roll up the rubber rolls at one end of the room. Apply double-sided tape to the subfloor along the perimeter of each roll. Place the rubber rolls back into position on top of the double-sided tape. B: Glue Installation Ensure that the subfloor is clean, dry, and free of any debris or moisture. Loosely lay the rubber rolls in the room to achieve your desired layout. Allow the rolls to relax for 24-48 hours to ensure proper installation. Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches. Cut the rubber rolls to fit the room using a straight edge and a utility knife with a fresh blade. Leave a gap around the perimeter roughly the thickness of the rolls being used to account for expansion and contraction. Roll up the rubber rolls at one end of the room. Spread a light layer of polyurethane adhesive that is 10 feet long (maximum) and unroll the flooring into the adhesive 10 feet at a time. Repeat step 5 for every 10 feet of roll length until the entire roll has been unrolled into its desired position. After all of the rolls have been glued down, it is recommended to use a 100-pound roller on the floor to guarantee good adherence to the subfloor. If a roller is not available, walking on the flooring in small choppy steps may also work.

Maintenance

Keeping your Rubber Rolls clean and looking their best is easy with these simple maintenance tips: Sweep or vacuum loose debris regularly to prevent buildup and minimize the risk of slips and falls. For a deeper clean, simply damp mop the rubber rolls with a mild soap and water solution. We recommend using Dawn dish detergent or Tide laundry detergent. Do not use any solvent or oil-based cleaners like Pinesol, Lysol, Murphy's Oil Soap, WD40, paint thinner, or similar products. These cleaners can break down the flooring over time and cause damage.

Full Specifications

alt unit of measure sqft
calculator type roll
can backorder true
category filters ["rubber_category","rubber_roll_category"]
color axis B1248
color display name 20% Blue
esd max 10
esd min 5
exact length inches {"amount":"12.0000","unit":"INCH"}
exact weight lbs {"amount":"6.0000","unit":"POUND"}
exact width inches {"amount":"48.0000","unit":"INCH"}
flooring designer none
gmc shipping weight 10.0000
has corner border center false
inventory false
is variant kit false
items per box 1.0000
material EPDM
max order qty 9999
max roll legnth 100.0000
min order qty 1
min rollcut 10.0000
nom thickness 1/4"
nominal length inches {"amount":"12.0000","unit":"INCH"}
nominal sq ft 4
nominal width inches {"amount":"48.0000","unit":"INCH"}
origin made_in_usa
primary color filter blue
qty increment 1
quick ship false
roll width {"amount":"4.0000","unit":"FEET"}
sample id S14393
shipping program none
size 4' wide
sku 13221_19296_81319
status color color_discontinued
status product product_discontinued
status variant variant_discontinued
tf made in usa made_in_usa
tf rubber format rubber_rolls
tf rubber thickness ["eight_mm","half_inch","quarter_inch","three_eighths"]
unit of measure linear_foot
variant axis A1091
variant display name 1/4" thick
visible when oos true