Nitro Tiles Pro

Installation Instructions for Nitro Tiles Pro:

Step 1: Prepare the Surface

• Ensure the garage floor is clean, dry, and free from dust, dirt, or debris.
• Sweep or vacuum the area before starting the installation. No adhesives or underlayment are required.
  
  

Step 2: Plan Your Layout

• Measure the area to be covered and plan your tile layout, starting from the center or one corner of the room.
• Leave a 1/2" gap between the tiles and walls or other fixed objects to account for expansion.
  
  

Step 3: Begin Installation

• Align the edges of the tiles and snap them together using the hidden interlock system.
• Continue connecting tiles until the entire area is covered, ensuring each tile is securely locked into place.
• If needed, trim tiles using a utility knife to fit around corners or obstacles.
  
  

Step 4: Final Touches

• Install edge pieces for a clean finish.
• Tiles can be cut to fit with a sharp utility knife for any tight spaces.
  
  

Step 5: Avoid Car Jack Damage

• Nitro Tiles Pro are not car jack approved. Always use your jack on concrete or place a plywood board or steel plate beneath the jack to prevent damage.

Care and Maintenance for Nitro Tiles Pro:

Regular Cleaning:

• Sweep or vacuum the tiles regularly to remove dirt, dust, or debris.
• Occasionally damp mop with a mild soap and water mixture. Common soaps include Dawn dish detergent or Tide laundry detergent.
  
  

Spill Management:

• The tiles are resistant to oil, gas, and household chemicals, but spills should be wiped up quickly to maintain cleanliness.
  
  

Handling Stains:

• While Nitro Tiles Pro resists most stains, street tar or performance tires can leave marks on lighter-colored tiles. Use a cleaner like Purple Power to address tar stains.
• For tire marks that don't come off, replacing the affected tiles or using darker tiles can help disguise stains.
  
  

Note on Color Variation:

• Garage tiles are produced in batches, leading to possible color variations between samples and your order. Colors like graphite and gunmetal are particularly prone to variations between batches.
• To ensure consistency, it's recommended to order extra tiles for mistakes or replacements.
  
  

Replacement and Repairs:

• Damaged or stained tiles can be replaced by snapping out the affected tile and installing a new one.
  
  

Customer Support:

• If the staining on your floor persists, contact Customer Service at 800-613-0996 for further assistance..