Budget Short Turf Rolls

Artificial Turf Installation Instructions:

Outdoor Installation

1. Preparation:

   • Clear the Area: Remove existing grass, sod, mulch, and other materials from the area where the turf will be installed. If landscaping around trees, shrubs, or obstacles, make sure to mark these areas and plan for the turf edge configuration. Leave adequate space around tree bases.
   • Sprinkler System: Cap any unused sprinklers at the pipe level to prevent leaks. If needed, relocate sprinklers and mark their positions. Move electrical sprinklers and wiring inward by 6-8 inches from hardscapes or perimeters to avoid damage during installation.
   • Subgrade Preparation: Place any moved items on the subgrade and secure with U-shaped nails.

2. Base Installation:

   • Material: Use decomposed granite (DG), a mix of gravel and sand, to create a stable base that allows proper drainage. For non-pet installations, spread DG to a depth of 3 inches.
   • Compaction: Distribute and level the DG, wetting it to help settle. Compact the base with a vibrator, tamper, or roller until it is flat and even.

3. Turf Placement:

   • Weed Barrier: If applicable, roll out weed cloth, overlapping edges by 6 inches. Secure with flat-head nails and trim to fit the area with a 1/4” border gap. Avoid driving nails too deeply to prevent dimpling.
   • Turf Layout: Align the turf using a straight or perpendicular edge. Cut excess turf by 1 inch along the edges for a proper fit. Secure the edges with temporary nails while fixing the opposite sides.
   • Seaming: Use a seaming tool to join turf edges. Cut turf in an S-shape to minimize seam visibility. Nail every 6 inches along the edge, driving nails 3/4 of the way down. Ensure nails are hidden by grass blades. Secure seams with 6-inch U-nails spaced 6 inches apart.

4. Final Steps:

   • Tucking: Use a metal bar (wonder bar) to tuck the turf edges against hardscapes for a seamless finish. Brush against the grain with a power or bristled brush to lift the grass blades. Apply infill or sand evenly to hold blades upright and add weight. Brush again to work the infill into the base and remove excess debris.

Indoor Installation

1. Surface Preparation:

   • Ensure the installation surface is level, clean, and dry. Suitable surfaces include concrete, dusting or powdering concrete, gypcrete, pressure-treated decking, wood, or backer board.

2. Turf Layout:

   • Dry Lay: Position the turf rolls to manage roll sequencing and minimize variations. Check the backing for manufacturing details to determine the fiber direction.

3. Adhesive Application:

   • Turf Pad: If using a pad, install it over the base with double-sided tape or glue.
   • Turf Installation: Apply adhesive or double-sided tape, then lay the turf. Seal seams with a bead of seam sealer.

4. Final Steps:

   • Roll the turf with a 75 lb. weighted roller across its width and length to ensure proper adhesion. Allow the installation to remain dry for 72 hours for the adhesive to fully cure.

Maintenance Instructions for Rolled Artificial Turf:

Maintaining your rolled artificial grass is essential to ensure its longevity and pristine appearance. Here are the steps to keep your turf looking its best:

Regular Cleaning:

• Periodically rake the turf with a plastic rake to remove leaves, twigs, and other debris. This helps to keep the surface clean and prevents the buildup of organic material that can encourage weed growth.
• Avoid using metal rakes, as they can damage the turf fibers.

Brushing:

• Use a power brush or a heavy-bristled brush to brush the turf against the grain. This will help to keep the blades upright and maintain the natural look of the turf.
• Brushing also helps to evenly distribute the infill and ensure proper support for the turf fibers.

Stain Removal:

• For spills or stains, clean the affected area promptly with a mild soap and water solution. Avoid using harsh chemicals that could damage the turf fibers.
• For tougher stains, a mixture of vinegar and water can be used. Rinse the area thoroughly with water after cleaning.

Weed Control:

• Although weed cloth helps prevent weeds, occasional weeds may appear around the edges or seams. Remove any weeds by hand to prevent them from taking root.
• If necessary, apply a water-based herbicide that is safe for synthetic turf to control weed growth.

Pet Maintenance:

• For areas used by pets, regularly remove solid waste and rinse the area with water to prevent odors.
• Use a turf deodorizer if needed to keep the area smelling fresh.

Infill Maintenance:

• Check the infill levels periodically and add more if needed to ensure the blades remain upright and the turf retains its resilience.
• Over time, infill can settle or be displaced, so it’s important to top it up as required.

By following these maintenance steps, your artificial turf will remain clean, attractive, and in excellent condition for years to come.