8mm PowerLock Rubber Gym Tiles

Installation of these interlocking rubber flooring tiles is very simple and usually done by the consumer. Typical installation of these tiles is as follows:

• First, clean your subfloor, so it is free of all dirt, grease, or debris. Start in one corner of the room and work outward along the adjacent walls. Leave the other two edges of the room open and fill in the rest of the room.
• After the open floor is covered, go back and cut in tiles along the opposite walls in the room. We recommend leaving a gap along the walls roughly the tiles' thickness being used to account for expansion and contraction of the floor in varied temperature ranges.

Note: When piecing interlocking tiles together, adhesives aren’t usually needed since the weight of the product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, you can use some double-sided tape or mat tape around the perimeter of the installation to prevent any movement.

PowerLock Rubber Gym Tiles are very durable as well as easy to maintain and keep clean. Maintenance for interlocking gym tiles includes:

Regularly vacuuming or sweeping any loose crumbs, dust or debris from the flooring surface when necessary. Occasionally damp mopping with a mild soap and water solution. Recommended soaps are Dawn dish detergent or Tide laundry detergent.

Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.