FloorDex Product Reference
3/4" Premium Rubber Gym Tiles
Model · 4067

3/4" Premium Rubber Gym Tiles

rubber tiles made in usa Vulcanized recycled rubber buffings and EPDM virgin-colored rubber flecks at a 25% color density
made in usa clean rubber diy friendly eco friendly

Our 3/4" Rubber Gym Tiles are designed for heavy-duty commercial use and are the perfect interlocking tiles for Olympic lifting, Cross Fit, and other extreme exercises. Being an interlocking tile, these rubber tiles are effortless to install and can be cut using a low-speed utility knife or saw. Featuring an anti-skid top surface, these gym tiles are great for areas where sweat and water may be present, helping to create a non-slip yet durable flooring surface for your home or commercial gym. Since these rubber flooring tiles are vulcanized, these tiles are also great for outdoor use and have been used as equine mats, dog kennel mats, patio flooring, deck flooring, and much more.


Size:

  • 4' x 6' (Interlocked size - 45" x 67.5")
  • 2' x 4' (Interlocked size - 22.5" x 45")
  • 2' x 6' (Interlocked size 22.5" x 67.5")

Weight:

  • 4'x 6' tile weighs approximately 105 lb
  • 2' x 4' tile weighs approximately 32 lb
  • 2' x 6' tile weighs approximately 48 lb


Note: Due to the manufacturing process and nature of recycled rubber, some surface variations, such as color distribution or shadowing, may exist, and tile thickness may vary. Shims may be provided free to assist with any tile thickness issues.

  • Great for both indoor and outdoor applications.
  • Available in center tiles.
  • Perfect for commercial gyms.
  • Use for Olympic lifting, extreme exercises, horse stalls, doggy daycares and much more.
Size
3' x 4'
Items/box
1.0000
Variants
10
Warranty
5-year warranty.

Available Variants (10)

Swatch SKU Color Status In stock
Glacier - 25%
4067_1590_41632 Glacier - 25% Active No
Red - 25%
4067_1590_41634 Red - 25% Active No
Tan - 25%
4067_1590_41635 Tan - 25% Active No
Blue - 25%
4067_1590_89447 Blue - 25% Active No
Black
4067_1590_89448 Black Active No
Black
4067_20533_88007 Black Active No
Glacier - 25%
4067_20533_88008 Glacier - 25% Active No
Blue - 25%
4067_20533_88009 Blue - 25% Active No
Red - 25%
4067_20533_88010 Red - 25% Active No
Tan - 25%
4067_20533_88011 Tan - 25% Active No

Installation

Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:

  1. First, clean your sub floor so it is free of all dirt, grease or debris.
  2. Snap a chalk line on the subfloor 24” from one wall in your room. Snap another chalk line on the subfloor 24” from an adjacent wall. You should now have a pair of perpendicular lines making an approximate 90-degree angle.
  3. Begin laying the interlocking tiles along the chalk lines, snapping the locks together as you go.
  4. Leave the perimeter of the room open until the field is installed.
  5. After the field is covered, go back and cut in tiles along the walls in the room. It is recommended to leave a gap along the wall roughly the thickness of the tiles used to account for expansion and contraction of the floor in varied temperature ranges.


Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked-together product is usually enough to keep the floor tiles from moving. However, suppose you do experience movement and would like to ensure that the tiles do not slide at all. In that case, some double-sided or mat tape can be used around the installation's perimeter to prevent movement.

Maintenance

Rubber Gym Tiles are very easy to maintain and keep clean. Maintenance of these interlocking gym tiles typically includes:

  1. Vacuuming any loose crumbs, dust, or debris from the tile flooring surface when necessary.
  2. Occasional damp mopping of the floor tile with a mild soap and water solution. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.


Note: Do not use solvent or oil-based cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc., as these will break down the flooring over time.

Full Specifications

alt unit of measure sqft
calculator type sqft
can backorder false
category filters ["rubber_category","rubber_tiles_category"]
color axis B1753
color display name Glacier - 25%
esd max 35
esd min 20
exact length inches {"amount":"22.5000","unit":"INCH"}
exact weight lbs {"amount":"18.0000","unit":"POUND"}
exact width inches {"amount":"22.5000","unit":"INCH"}
flooring designer none
gmc shipping weight 105.0000
has corner border center false
inventory false
is variant kit false
items per box 1.0000
lf features ["recycled_content","vulcanized"]
material Vulcanized recycled rubber buffings and EPDM virgin-colored rubber flecks at a 25% color density
max order qty 99999
min order qty 1
nominal length inches {"amount":"22.5000","unit":"INCH"}
nominal sq ft 4
nominal width inches {"amount":"22.5000","unit":"INCH"}
origin made_in_usa
pdp icon 5 recycled
pdp icon 6 vulcanized
percent overage 5
primary color filter white
qty increment 1
quick ship false
recycled content true
sample id S13307
shipping program none
size 3' x 4'
sku 4067_1590_41632
status color color_launched
status product product_launched
status variant variant_launched
tf made in usa made_in_usa
tf rubber format rubber_tiles
tf rubber thickness ["three_quarter"]
unit of measure tile
variant axis A1312
variant display name 2' x 2' Tiles
visible when oos true