FloorDex Product Reference
15mm Impact Tiles - Designer Series
Model · 5035

15mm Impact Tiles - Designer Series

rubber tiles made in usa Recycled SBR Rubber and EPDM
made in usa clean rubber diy friendly eco friendly

Durable yet highly shock absorbent, our 15 mm Impact Designer Series tiles are hands down the best flooring option for any multi-purpose gym. Designed with high-impact workouts in mind, these interlocking tiles feature a 3 mm standard rubber top, allowing you to use this product in areas where weights and other gym equipment are present. Easy to install and maintain, these colorful rubber tiles are available in center cut tiles and are backed by a 5-year warranty. Since each tile features a 1/2" layer of rubber underlay, each tile is not only very slip-resistant but will also provide you with optimal sound absorption. These tiles are great for upstairs gyms, playrooms, bedrooms, and much more.




Recommended Uses: 15mm Impact Designer Series tiles are the perfect flooring option for any high impact workout and have been successfully used in commercial gyms, home gyms, as playroom flooring, as flooring for Cross Fit, in basements, and more. You can also use this flooring for trade shows, in upstairs gyms, bedrooms, and playrooms, and any where a durable yet shock absorbent floor is desired.




Quick Notes:

- Our 15mm Impact Tiles - Designer Series are made in batches, which can lead to color variations when placing multiple orders. Due to this, we recommend ordering more flooring than is needed for mistakes, replacements, and future floor growth to keep your floor looking beautiful and consistent.

  • Small tile, huge shock absorption.
  • Slip resistant and shock absorbent.
  • Backed by 5 year warranty.
  • Colored virgin rubber flecks backed by recycled rubber.
  • Perfect for multi-use weight rooms.
Size
23" x 23"
Items/box
1.0000
Variants
9
Warranty
5-Year Warranty.

Available Variants (9)

Swatch SKU Color Status In stock
Royal Heir - 30%
5035_3843_29663 Royal Heir - 30% Active No
Red Knight - 30%
5035_3843_29664 Red Knight - 30% Active No
Black
5035_3843_56507 Black Active No
Baby Blue - 20%
5035_3843_56508 Baby Blue - 20% Active No
Gray - 20%
5035_3843_56509 Gray - 20% Active No
Bright Red - 20%
5035_3843_56510 Bright Red - 20% Active No
Tan - 20%
5035_3843_56511 Tan - 20% Active No
Meteor - 30%
5035_3843_56512 Meteor - 30% Active No
Navy Blue - 95%
5035_3843_56517 Navy Blue - 95% Active No

Installation

Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
  • First, clean your sub floor so it is free of all dirt, grease or debris.
  • Snap a chalk line on the subfloor 24” from one wall in your room. Snap another chalk line on the subfloor 24” from an adjacent wall. You should now have a pair of perpendicular lines making an approximate 90-degree angle.
  • Begin laying the interlocking tiles along the chalk lines, snapping the locks together as you go.
  • Leave the perimeter of the room open until the field is installed.
  • After the field is covered, go back and cut in lines along the walls in the room. Leaving a gap at the wall roughly the thickness of tiles being used is recommended to account for expansion and contraction of the floor tiles in varied temperature ranges.


Note: When piecing interlocking tiles together, adhesives aren’t usually needed since the weight of the product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, you can use some double-sided tape or mat tape around the perimeter of the installation to prevent any movement.

Maintenance

Impact rubber tiles are very durable as well as easy to maintain and keep clean. Maintenance for interlocking gym tiles include:
  • Vacuum any loose crumbs, dust, or debris from the flooring surface when necessary.
  • Occasionally, you will want to use a damp mop with a mild soap and water solution. Recommended soaps are Dawn dish detergent or Tide laundry detergent.


Note: Do not use any solvent or oil style cleaners such as Pine-Sol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.

Full Specifications

alt unit of measure sqft
calculator type sqft
can backorder true
category filters ["rubber_category","rubber_tiles_category"]
color axis B2523
color display name Royal Heir - 30%
esd max 25
esd min 15
exact length inches {"amount":"23.0000","unit":"INCH"}
exact weight lbs {"amount":"9.0000","unit":"POUND"}
exact width inches {"amount":"23.0000","unit":"INCH"}
fd swatch sku url 1 https://d2q5qaygbbwnnw.cloudfront.net/image/230444301506/image_3v083pk5d14mt0m9nu6qnvc86b
flooring designer none
gmc shipping weight 9.0000
has corner border center false
inventory false
is variant kit false
items per box 1.0000
lf features ["recycled_content"]
material Recycled SBR Rubber and EPDM
max order qty 99999
min order qty 50
nominal length inches {"amount":"23.0000","unit":"INCH"}
nominal sq ft 3.67
nominal width inches {"amount":"23.0000","unit":"INCH"}
origin made_in_usa
pdp icon 5 recycled
percent overage 5
qty increment 1
quick ship false
recycled content true
sample id S13130
shipping program none
size 23" x 23"
sku 5035_3843_29663
status color color_launched
status product product_launched
status variant variant_launched
tf made in usa made_in_usa
tf rubber format rubber_tiles
unit of measure tile
variant axis A1443
variant display name 23" x 23" Tile
visible when oos true